Description
The #HDCA-45 45LB Can Anchor with Shovel Points is designed especially for sandy and gravely river bottoms and is built particularly for jet or power boats less than 16 ft. in length. It’s made of schedule 40 pipe with a solid steel cone welded on one end. The 6 claws, each 3 1/2 inches, are welded to the opposite end and there is an additional piece of angle iron welded to each claw to form the shovel points. These provide extra holding power. The steel shell is then filled with lead around 3/4 inch aluminum pipe. There is a recess in the bottom for the knot in the anchor line.
Make your boating easier by using this anchor with either the #LCA-02 Large Anchor Can Assembly with 1/2″ Lock or the #LCA-03 Large Anchor Can Assembly with 5/8″ Lock. They are built to make your day on the water safe, easy and worry free.
As is the case with all Leelock products, this Can Anchor is built by hand in the USA!
